Developed in conjunction with experienced F1B modelers, this dependable device is intended as a replacement of popular
clockwork timers. It is extremely easy to use for all modelers.
Key advantages of the Sidus timer include: accurate timings, remote dethermalization (RDT),
and the ability to be programmed through a wireless interface.
TIMER
Nr. of functions:
6 (F1 to F6)
Configuration:
1 front arm + 5 rear arms
Timing:
F1, F2: 0.01 to 9.99 sec, F3 to F5: 0.1 to 99.9 sec, F6: 1 to 720 sec
Control board size: 35.0 w x 20.0 h mm
RDT: Built-in receiver and whip antenna - code encryption
Battery: Rechargeable lithium polymer cell, duration exceeds 60 flights of 180 sec. each
PROGRAMMER
Display:
LCD - 2 lines x 16 characters
Keyboard:
4 keys
Size:
113 × 59 x 24 mm (4.5 x 2.3 x .95")
RDT: Built-in transmitter and helical antenna, code encryption
Battery: Rechargeable lithium polymer cell - duration exceeds 1 year
|
F1B/G Starter Kit
|
Please contact for prices |
|
|
F1B Mechanical Assembly 5 Arms |
|
|
|
F1B Mechanical Assembly 6 Arms |
|
|
|
F1B Mechanical Start Switch Assembly |
|
Developed in conjunction with experienced F1C modelers, this dependable device provides protection against many
typical problems of the modern F1C models, mostly caused by their high frequency vibrations and fuel.
Mainly intended as a replacement of popular clockwork timers, it is easy to use for all modelers.
Key advantages include: accurate timings, remotely controlled dethermalization (RDT) and the ability to be programmed through a wireless interface.
Mechanical Assembly Options include
2+4 arms OR 1+5 arms.
Functions are operated by a rugged micro servo with ball bearing and Karbonite gear, stepped to the release levers.
The mechanical
assembly incorporates a ball race to take the loads imposed by the levers and relieve the servo that only applies
torque to rotate the disc when a programmed function expires. Two options are available.
TIMER
Nr. of functions:
6 (F1 to F6)
Configurations:
2 front arms + 4 rear arms, 1 front arm + 5 rear arms, Wing-Wiggler
Timing: F1, F2: 0.01 to 9.99 sec, F3 to F5: 0.1 to 99.9 sec, F6: 1 to 720 sec
Mech. assembly size: 58.0 w x 25.4 h x 24.5 d mm (2.28 x 1.0 x .96")
Control board size: 46.0 w x 22.0 h mm
Weight:
~ 35 gms including pushbutton and battery
RDT:
built - in receiver and whip antenna - code encryption
Battery: Rechargeable lithium polymer cell - duration exceeds 80 flights of 180 sec. each
|
|
F1C
6 Function VE Mechanical Assembly |
Please contact for prices |
|
F1C 6 Function SE Mechanical Assembly |
|
|
F1J 6 Function Mechanical Assembly |
|
|
Magnetic Start Switch |
|
Hall Sensor/Cable |
F1Q 6 Function Mechanical Assembly |
Please contact for prices |
|
F1Q Energy Limiter EDIC Certified |
||
|
Magnetic Start Switch |
|
Hall Sensor/Cable |
Sidus Wireless Programmer Display:
LCD - 2 lines x 16 characters |
Please contact for prices |
|
|
Sidus G2 BTBox, Downloads Flight Data |
|
|
LED Flasher |
SLFT-2050A |
210 MAH Battery |
Please contact for prices |
SLFT-2048A |
280 MAH Battery |
|
SLFT-2049 |
350 MAH Battery |
|
SLFT-2042 |
120MAH For Sidus RDT |
|
SLFT-2052A |
Sidus Programmer Battery |
StarLink–FliteTech | 14450 Maplewood St. | Poway, CA 92064-6445 | (858) 231-4994
